Recent Searches
    Series ( results)
      Models ( results)
        Keywords

          High-Performance Micro Static EliminatorSJ-M series

          SJ-M021G

          Spot Type Main Unit, Head Cable 2-m and CAB Needle

          SPECIFICATIONS

          Select Language

          Model

          SJ-M021G

          Type

          Static Elimination Head

          Voltage application method

          Pulse AC method

          Applied voltage

          ±5.5 kV

          Rated output voltage

          ±6 kV

          Ion balance control method

          I.C.C. method

          Static elimination time

          0.5 sec. max.*1

          Ion balance

          ±15 V or less*2

          Air purge supplied pressure

          0.001 to 0.5 MPa*3

          Min. air pressure

          With SJ-ML

          0.02 MPa (20 Nl/min)

          With SJ-MS/ML1

          0.03 MPa (20 Nl/min)

          With SJ-MS/ML2

          0.02 MPa (20 Nl/min)

          With SJ-MS/ML3

          0.08 MPa (50 Nl/min)

          With SJ-MS/ML4

          Control input

          Static elimination stop input

          Non-voltage input

          Control output

          Alarm output

          NPN open collector 100 mA (40 V or less)

          Ion level alarm output

          Condition alarm output

          Rating

          Power voltage

          24 VDC ±10 %

          Current consumption

          450 mA or less

          Environmental resistance

          Ambient temperature

          0 to +80 °C*4*5

          Relative humidity

          35 to 65 % RH

          Weight

          Approx. 600 g

          *1 Values obtained at an installation distance of 50 mm and air flow rate of 60 Nl/min [ambient operating temperature +20 to +30 °C, ambient operating humidity 40 to 60 % RH] (without nozzle)
          *2 Values obtained at an installation distance of 50 mm and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C, ambient operating humidity 40 to 60 % RH] (without nozzle)
          *3 Inquire for derating of humidity/pressure in environments exceeding +35 °C. Use clean or dry air at a temperature of -20 °C or less. Min. air pressure varies by nozzle used.
          *4 Use a supplied fluid with a temperature of 40 °C or less.
          *5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C.

          Static Eliminators / Ionisers