Recent Searches
    Series ( results)
      Models ( results)
          Fully Operational with Expanded Resources
          Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
          1. Home
          2. Products
          3. Sensors
          4. Fibre Optic Sensors
          5. Manual-Calibration Fibreoptic Sensor
          6. Features

          Manual-Calibration Fibreoptic Sensor

          FS-V/T/M series

          FS-V1 Series Amplifier

          Multi-function , Digital Calibration Sensor. FS-V1(P)

          FS-V1 Fibre optic sensor amplifer

          Expansion Unit Control Function

          While viewing the value displayed on the main unit's monitor, you can perform fine sensitivity adjustment for the expansion units.
          When FS-T2 expansion units are connected to the FS-V1 main unit, the FS-V1's display can show received light intensity and can show the sensitivity of the expansion units. You can adjust the sensitivity of the expansion units in fine increments, while viewing the received light intensity of the expansion units on the FS-V1's display.

          Digital Monitor

          The sensitivity or received light intensity is digitally displayed on the monitor for optical alignment and maintenance work.
          Two display modes are available;excess gain display (percent) and received light intensity display (4 digits). The display allows you to easily find dirt or dust on the fibre unit tip or a misaligned optical axis. After performing one-touch calibration, you can adjust the sensitivity in fine increments while viewing the value displayed on the monitor. This adjustment allows for more accurate detection based on the line conditions/speed.

          Sensitivity Setting Procedure (Multiple Setting Modes)

          FS-V1 Full automatic

          Fully Automatic Calibration

          Press the SET button to automatically detect the sensitivity difference between a target and a background. Calibration does not require production stoppage.

          FS-V1 Position calibration

          Positioning Calibration

          This is effective when you want a signal indicating that a target has reached a specified position. Applications include fixed length cutting of hoop material or printing marks on parts.

          FS-V1 2 Point calibration

          2-point Calibration

          2-point calibration is used to make minute sensitivity adjustments that cannot be done with conventional automatic calibration. This calibration is easy to perform and can help you detect marginal defects on your product line.

          In addition to models with a red light source, a green light source model, the FS-T1G, is available for more accurate colour detection.

          Industry's First Dual-output Fibre Optic Sensor

          Dual outputs can be used for control based on the upper/lower limits or alarm output.
          The FS-V1 is the first fibre optic sensor with dual independent outputs. A single FS-V1 does the sensing work of two sensors. This function can be used for a variety of applications such as control output based on the upper/lower limits or alarm output.

          • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE SINGAPORE PTE LTD. 151 Lorong Chuan,#05-07, New Tech Park Lobby G, Singapore 556741
          Phone: +65-6392-1011
          Career Opportunities: KEYENCE Career Site