Specs High-speed 2D Optical Micrometer TM-3000 series

Model		TM-006	TM-040	TM-065
Image
Measuring range		ø6 mm	ø40 mm	ø65 mm
Minimum detectable object		0.04 mm	0.3 mm	0.5 mm
Transmitter/receiver distance		60 mm	180 mm	270 mm
Light source		GaN Green LED	InGaN Green LED
Measurement accuracy		±0.5 µm^*1	±2 µm^*5	±3 µm^*7
Repeatability		±0.06 µm^*2	±0.15 µm^*6	±0.2 µm^*8
Sampling cycle (trigger interval)		5.5ms (33ms at the initial setting)^*3
Environmental resistance	Enclosure rating	IP64^*4
	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 85 % RH (No condensation)
Material		Aluminium
Weight	Transmitter	Approx 140 g	Approx 560 g	Approx 1280 g
	Receiver	Approx 340 g	Approx 720 g	Approx 1460 g
	Base	Approx 220 g	Approx 630 g	Approx 1500 g
^1 In a measurement area of 2 mm x ø4 mm error when measuring width of KEYENCE standard object (glass calibration scale). ^2 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the centre of the measurement area, an average 16 times, average 1.3 mm line. ^3 When measurement area is minimum, others are initial settings ^4 Apart from connector component ^5 In a measurement area of 10 mm x ø26 mm error when measuring width of KEYENCE standard object (glass calibration scale). ^6 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the centre of the measurement area, an average 16 times, average 8 mm line. ^7 Error when measuring width of KEYENCE standard object (glass calibration scale) in a measurement area of 20 mm x ø40 mm. ^8 Value of ±2σ measuring the width of KEYENCE standard object (glass calibration scale) in the centre of the measurement area, an average 16 times, average 14 mm line.

Model		TM-3001	TM-3001P
Image
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm, ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)	Non-voltage input^*2	Voltage input^*2
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analogue voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	NPN open-collector output^*2	PNP open-collector output^*2
	Error output	NPN open-collector output (N.C.)^*2	PNP open-collector output (N.C.)^*2
	Process output	NPN open-collector output^*2	PNP open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Non-voltage input^*2	Voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Programme switching input	Non-voltage input, 4 inputs^*2	Voltage input, 4 inputs^*2
	Memory card save input	Non-voltage input^*2	Voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output^*3	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) PNP open-collector output^*3
	Strobe output	NPN open-collector output^*2	PNP open-collector output^*2
	Trigger input enable output
Analogue RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.