VT STUDIO Basic Training Video Descriptions

Startup

This video explains how to start a new project and connect it to a KV STUDIO program, including importing variables and setting the target IP address of the PLC.

Part and Screen Catalog

This video outlines the parts catalog and the parts tab, as well as how to add prebuilt screens from the screen catalog.

Simulator

This video shows the three methods to simulate a VT STUDIO project: connection with KV STUDIO, connection with a PLC, and the device simulator.

Show Text

This video explains how to add a text display part and how to allow key entry by using a keyboard part in a new global window.

Alarm

This video explains how to configure the alarm system settings, including alarm messages and alarm actions. Then, it shows how to add and configure the alarm display part.

Security Settings

This video outlines the password protection function, and how to create multiple password levels.

CVX Display

This video shows how to connect with other Keyence sensor and imaging products, such as a vision system, and how to add a monitor part for a product.

Message Display

This video explains how to create a new message in the system settings. Then, it outlines how to add and configure a message display part.

System Memory Area

This video explains how to transfer important information from the HMI to the PLC using system memory area.

Change IP Address and Transfer

This video shows how to change the IP addresses on the HMI ports, set the IP address for communication with the HMI, and transfer a project to the HMI.