Multi-spectral lighting (200 mm) CA-DRM20X

CA-DRM20X - Multi-spectral lighting (200 mm)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		CA-DRM20X
Type		Multi-Spectrum Lighting
Illumination method		Ring illumination (with support for optional CA-DRM (DA) Series dome attachment and CA-DRM (PA) Series polarisation attachment^1) Multi-Spectrum lighting / LumiTrax lighting / Normal lighting (single-colour lighting in all directions)^2 Constant current control mode (1,024-step digital gradation: With CA-DC60E connected / Adjustable per wavelength^*3)
Response speed		1 ms or less
LED	Peak wavelength	Ultraviolet: 405 nm / Blue: 457 nm / Green: 527 nm / Orange: 600 nm / Red: 660 nm Far red: 730 nm / Infrared: 860 nm / White: 600 nm (All values approximate)
Controller connection		Dedicated cable (3 m/5 m/10 m), Max. 30 m (with extension cables^*4)
I/F input		12-pole connector (dedicated cable)
Power consumption		71.0 W (during normal light emission)
Environmental resistance	Ambient temperature	0 to 40 °C
	Relative humidity	65%RH or less (No condensation)
Weight		Approx. 1,080 g (With dome attachment: Approx. 1,730 g /With polarisation attachment: Approx. 1,570 g)
^1 The UV and IR wavelengths cannot be used when the polarisation attachment is attached. ^2 Continuous lighting can only be set during normal lighting when brightness value control is set to ON. ^3 Simultaneous lighting of multiple colours is not supported. ^4 Connection of up to two dedicated extension cables is allowed.