Amplifier Unit PNP FT-50AWP

Model

FT-50AWP

Type

DIN-rail mounting type

Rating

Power voltage

12 to 24 VDC, Ripple (P-P)10% max.

Power consumption

Normal

1400 mW (For 12 V), 1600 mW (For 24 V)

Powerconsumption

Eco mode

1150 mW (For 12 V), 1350 mW (For 24 V)

Display power

4 + 1/2-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm, character height in the lower display (green): 5.7 mm), Display updating cycle: 10 time/s

Operation indicator

Red LED × 3 (control output1/control output2/timing input indicator)

Display resolution

0.1°C or 1°C (when using H10/H20/H30), 1°C (when using H50/H40K/H50K)

Hysteresis

Variable

Response

HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 15 ms max.)

Bank selection

Pink and Purple wires can be configured for Bank Inputs 1,2 respectively for up to 4 total banks.

Bank specifications

Emissivity (valid in temperature mode) and limit settings × 2 can be set for each bank.

External input

Timing input

Input time: 2 ms min.

Bank input

Input time: 20 ms min.

Control output

PNP open collector × 2 channels (N.O./N.C. selectable), 50 mA max. 30 VDC max., residual voltage: 1 V max.

Analogue output

4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analogue output range can be set optionally.

Environmental resistance

Ambient temperature

-10 to +50°C, No freezing ^*1

Relative humidity

35 to 85%, No condensation

Vibration resistance

10 to 55 Hz, double amplitude: 1.5 mm, 2 hours in each of X, Y, and Z axis directions

Material

Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride
Mounting bracket: SPCC

Accessories

DIN anchoring fixture, power cable, unit cover sticker

Weight

Approx. 85 g