Recent Searches
    Series ( results)
      Models ( results)

          Wire-saving AI Digital Pressure SensorAP-V40 series


          Amplifier Unit, Main Unit, NPN


          Select Language




          Amplifier Unit, NPN

          Applicable sensor head

          AP-41M, AP-41, AP-43, AP-44, AP-48


          4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s

          Operation indicator

          Red LED x 2 (corresponding to control output 1 and 2)

          Power consumption


          12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.

          Display resolution

          AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa
          AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa
          AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa

          Display temperature characteristic

          ±1 % of F.S. or less


          Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable

          Response time (Chattering prevention function)

          1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)


          Analogue output

          1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)

          Zero-shift input

          Input time: 2 ms or more (or analog output selectable)

          Control output

          NPN open collector 100 mA max. (at 40 V or below) *1 with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)


          Power voltage

          12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

          Power consumption

          Eco mode

          12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.

          Environmental resistance

          Ambient temperature

          0 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions




          Mounting bracket, head connection connector


          Approx. 80 g (with 2 m cable)

          *1 The maximum current is 20 mA if the AP-V42W (P) is installed as an expansion unit.

          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Process Controls / Process Sensors