Recent Searches
    Series ( results)
      Models ( results)
          Fully Operational with Expanded Resources
          Click for the latest on how KEYENCE is continuing to support our customers with quick delivery, off-site testing, virtual demos and more.
          1. Home
          2. Products
          3. Measurement Sensors
          4. Laser Displacement Sensors
          5. CCD Laser Displacement Sensor
          6. Models
          7. Sensor Head, Small Spot, Laser Class 2

          CCD Laser Displacement SensorLK series

          Sensor Head, Small Spot, Laser Class 2


          [Discontinued model]

          This model has been discontinued.

          Recommended Replaceable Products
          To contact us:


          Select Language




          Sensor head Long-distance *1 Sensor head

          Measurement mode

          High-precision mode,Long-range mode

          Reference distance

          350 mm (High-precision mode),500 mm (Long-range mode)

          Measuring range

          ±100 mm (High-precision mode),±250 mm (Long-range mode)

          Light source


          Visible red semiconductor laser


          690 nm


          0.95 mW

          Laser Class

          FDA (CDRH) 21CFR
          Part 1040.10

          Class 2 Laser Product


          IEC 60825-1

          Spot diameter (at standard distance)

          Approx. 0.7 mm (High-precision mode),Approx. 0.3 mm (Long-range mode)


          ±0.1% of F.S. *2


          10 µm*3 (High-precision mode), 50 µm*3 (Long-range mode)

          Analogue output

          Output voltage

          ±10 V (10 µm/mV)*4 (High-precision mode), ±5 V (50 µm/mV)*4 (Long-range mode)


          100 Ω

          Output current

          4 to 20 mA (Applicable load: 350 Ω max.)

          Alarm output

          NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.

          Sampling cycle

          1,024 µs

          Other functions

          Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle

          Temperature characteristics

          0.02% of F.S./°C


          Power voltage

          24 VDC ±10 %, Ripple (P-P) 10 % or less

          Maximum current consumption

          400 mA max.

          Environmental resistance

          Enclosure rating


          Ambient light

          Incandescent or fl uorescent lamp: 10,000 lux max.

          Ambient temperature

          0 to +50 °C (No condensation)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions


          Aluminium die-cast


          Approx. 700 g (including cable)

          *1 The LK-503 can both be used in High-precision mode or Long-range mode.
          *2 Linearity was obtained using KEYENCE's standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503).
          *3 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64.
          Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board.
          *4 When measurement is impossible, 12 V (31.2 mA) is output.

          Measurement Library

          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Back to top

          KEYENCE SINGAPORE PTE LTD. 151 Lorong Chuan,#05-07, New Tech Park Lobby G, Singapore 556741
          Phone: +65-6392-1011
          Career Opportunities: KEYENCE Career Site

          Measurement Sensors