Programmable Controller
KV-5000/3000 series
CPU unit with built-in EtherNet/IP™ port KV-5500
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | KV-5500 | |||
Type | CPU Unit | |||
General specifications | Power voltage | 24 VDC (±10%) | ||
Operating ambient temperature | 0 to +50°C (with no frost)*1*2 | |||
Operating ambient humidity | 10 to 95%RH (no condensation)*3 | |||
Ambient temperature for storage | -20 to +70°C*3 | |||
Storage relative humidity | 10 to 95 % RH (No condensation)*1*4 | |||
Operating environment | Without dust and corrosive gas | |||
Altitude | 2,000 m or less | |||
Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator) | |||
Withstand voltage | 1,500 VAC for 1 minute between the power supply terminal and the I/O terminals and between all the external terminals and the case | |||
Insulation resistance | 50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals and between all the external terminals and the case) | |||
Shock resistance | Acceleration 150 m/s2, Operation time 11 ms, twice in each of the X, Y and Z directions | |||
Overvoltage category | II (when using KV-U7) | |||
Pollution degree | 2 | |||
Vibration resistance | Intermittent vibration | Frequency 5 to 9 Hz | Half amplitude: 3.5 mm*5 | |
Frequency 9 to 150 Hz | Acceleration: 9.8 m/s2*5 | |||
Continuous vibration | Frequency 5 to 11 Hz | Half amplitude: 1.75 mm*5 | ||
Frequency 9 to 150 Hz | Acceleration: 4.9 m/s2*5 | |||
Performance specifications | Arithmetic control mode | Stored program mode | ||
I/O control mode | Refresh mode | |||
Program language | Expanded ladder, KV Script, mnemonic | |||
Number of commands | Basic instruction: 81 classes, 182 instructions | |||
Instruction execution speed | Basic instruction: Min. 10 ns | |||
Program capacity | Approx. 260k steps | |||
Maximum number of units to be installed | 16 units (48 units when expansion units are connected) | |||
Maximum number of I/O points | Maximum 3,096 points for expansion (KV-EB1S/KV-EB1R: When 2 units are expanded, 64-point I/O unit is used) | |||
Bit device | Input relay R | Total 16,000 points 1 bit | ||
Output relay R | ||||
Internal auxiliary relay R | ||||
Link relay B | 16,384 points 1 bit | |||
Internal auxiliary relay MR | 16,000 points 1 bit | |||
Latch relay LR | ||||
Control relay CR | 640 points 1 bit | |||
Word device | Timer T | 4,000 points 32 bits | ||
Counter C | ||||
Data memory DM | 65,535 points 16 bits | |||
Expansion data memory EM | ||||
File register | Memory bank switching mode FM | 32,768 points × 4 memory banks 16 bits | ||
Dial mode ZF | 131,072 points 16 bits | |||
Link register W | 16,384 points 16 bits | |||
Temporary data memory TM | 512 points 16 bits | |||
High-speed counter CTH | 2 points 32 bits | |||
4 points 32 bits (2 points for one high-speed counter) | ||||
Index register Z | 12 points 32 bits | |||
Control memory CM | 6,000 points 16 bits | |||
Positioning pulse output | 2 points (maximum output frequency: 100 kHz) | |||
CPU unit I/O | Input: 16 points, output: 8 points | |||
Power failure hold function | Program memory | Flash ROM can be rewritten 100,000 times | ||
Device | 5 years (operating ambient temperature of 25°C in the power failure hold mode)*6 | |||
Self-diagnosis function | CPU abnormal, RAM abnormal, other | |||
Internal current consumption | CPU unit: 320 mA or less | |||
Weight | CPU unit: approx. 320 g | |||
*1 Guaranteed range in which the system can be used. |