High-speed, High-Accuracy, digital inductive displacement sensors

EX-V series

Select Language

Sensor head

Model

EX-305V*1

EX-110V*1

EX-416V*1

EX-422V*1

EX-614V*1

Type

Sensor head

Amplifier unit

EX-V01(P)

EX-V02(P)

EX-V05(P)

EX-V10(P)

EX-V64(P)

Shape

ø5.4 x 18 mm Cylindrical

M10 x 18 mm Threaded

ø14.5 x 20 mm Cylindrical,threaded

ø22 x 35 mm Cylindrical,threaded

14 x 30 x 4.8 mm Thin profile

Measuring range

0 to 1 mm

0 to 2 mm

0 to 5 mm

0 to 10 mm

0 to 4 mm

A/D converting system

Display range

-19999 to +19999

Linearity

±0.3% of F.S.

Resolution (No. of averaging
measurements: 64)

0.4 μm

1 μm

2 μm

1 μm

Sampling rate

40000 samplings max./sec. *2

Display speed

20 times/sec.

Display power

7-segment 2-colour LED

Over-range alarm

±FFFF is displayed.

Control output

NPN open-collector or non-voltage contact signal

Controloutput

Setting method

Upper/lower 2-level setting x 4 patterns (selectable)

Control output

Signal

Controloutput

Response time

0.075 ms (at maximum speed)

OFF-delay time

60 ms (ON/OFF selectable)

Strobe output

NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)

Control output

Alarm output

Analogue output voltage

Output voltage

±5V

Impedance

100 Ω

Response time

0.075 ms (at maximum speed)

Temperature characteristics

0.07% of F.S./°C *3

Major functions

FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

240 mA or less

Environmental resistance

Ambient temperature

-10 to +60 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Weight

Approx. 45 g (including 3-m cable)

Approx. 55 g (including 3-m cable)

Approx. 75 g (including 3-m cable)

Approx. 200 g (including 3-m cable)

Approx. 60 g (including 3-m cable)

*1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials.
*2 When the digital filter function is used, the sampling rate is 20000 sampling/sec.
*3 When the distance between the sensor head and the target is within 50% of the measuring range.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Sensor Library

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors