Built-in amplifier photoelectric sensorsPZ-101 series

PZ-101P

Square Reflective Cable Type, PNP

SPECIFICATIONS

Select Language

Model

PZ-101P

Type

Focused-beam

Detecting distance

0 to 100 mm

Light source

Visible red LED

Spot diameter

Approx. 5 mm (when detecting distance is 50 mm), Approx. 7 mm (when detecting distance is 100 mm)

Detectable object

Transparent and opaque materials

Hysteresis

20% max. of detecting distance

Sensitivity adjustment

1-turn trimmer (240°)

Response time

1 ms max. (2 ms in alternate frequency mode)

Operation mode

LIGHT-ON/DARK-ON (selectable by wiring)

Indicator lamp

Output: Red LED, Stable operation: Green LED, Power supply: Red LED

Control output

PNP open-collector 100 mA max. (30 V max.)

Stability output

Protection circuit

Reversed polarity, overcurrent protection

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

30 mA or less

Environmental resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-20 to +55 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Case material

Glass-fibre reinforced plastic

Weight

Approx. 75 g

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors