CZ series
Model |
CZ-10 |
CZ-11 |
CZ-13 |
CZ-40 |
CZ-41 |
|||
Type |
Reflective (Small size |
Reflective (Small size, side-view |
Reflective (Long-distance, small spot type) |
Reflective (Long detection distance) |
Reflective (Small beam spot) |
|||
Detecting area |
10 to 30 mm |
3 to 15 mm |
35 mm ±3 mm |
70 ±20 mm |
16 ±4 mm |
|||
Smallest spot diameter |
0.9 to 3.5 mm dia. |
0.9 to 1.5 mm dia. |
2 mm dia. |
6 mm dia. |
1 mm dia. |
|||
Allowable bending radius |
R25 mm |
R15 mm |
||||||
Cable length |
2 m (free-cut) |
1 m (Fibre:free-cut) |
2 m (free-cut) |
|||||
Environmental resistance |
Enclosure rating |
IP40 |
IP67 |
|||||
Ambient temperature |
-40 to +70 °C (No freezing) |
|||||||
Relative humidity |
35 to 85 % RH (No condensation) |
|||||||
Material |
Fibre: Plastic (Polyethylene sheathed) |
|||||||
Case material |
Lens case: Aluminium, Fibre case: Stainless steel |
Polyarylate |
||||||
Weight |
Approx. 5 g |
Approx. 13 g |
Approx. 20 g |
Approx. 27 g |
Model |
CZ-12 |
CZ-60 |
|||
Type |
Area beam spot, reflective |
Transparent object differentiation, retro-reflective |
|||
Detecting area |
5 to 20 mm |
Reflector R-2: 40 to 1,000 mm |
|||
Allowable bending radius |
R25 mm |
||||
Cable length |
2 m (free-cut) |
||||
Environmental resistance |
Ambient temperature |
-40 to +70 °C (No freezing) |
-20 to +55 °C (No freezing) |
||
Relative humidity |
35 to 85 % RH (No condensation) |
||||
Material |
Fibre: Plastic (Polyethylene sheathed) |
||||
Case material |
Polysulfone |
||||
Weight |
Approx. 19 g |
Approx. 23 g |
Model |
CZ-V1 |
CZ-K1 |
CZ-K1P |
|||
Output |
NPN |
PNP |
||||
Light source |
Red LED, Green LED, Blue LED |
|||||
Response time |
300 µs/1 ms (switch-selectable) |
|||||
Indicator lamp |
Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED, |
|||||
Error indication |
Excess light intensity, insufficient light intensity, insufficient colour difference |
|||||
Calibration method |
1-point/2-point calibration (switch-selectable) |
|||||
Tolerance value adjustment |
Numerical value setting on digital display |
|||||
Differentiation mode |
C mode/C + I mode/I mode (switch-selectable) |
|||||
Timer function |
OFF-delay timer (40 ms)/Timer OFF (switch-selectable) |
|||||
Output selection |
Match output: Turns on when target colour matches registered colour. |
|||||
External synchronisation input |
Response speed: 500 µs max. |
|||||
External calibration input |
Input response time: 20 ms min. |
|||||
Registered colour selection |
8-bank selection (By external input or key operation), |
8-bank selection (By external input), |
||||
Control output |
NPN:40 VDC max. (100 mA max.), Residual voltage: 1.0 V max. |
NPN: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max. |
PNP: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max. |
|||
Protection circuit |
Reverse-polarity protection (power supply), |
|||||
Rating |
Power voltage |
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
||||
Current consumption |
75 mA or less |
|||||
Environmental resistance |
Ambient light |
Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max. |
||||
Ambient temperature |
-10 to +55 °C (No freezing)*1 |
|||||
Relative humidity |
35 to 85 % RH (No condensation) |
|||||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
|||||
Shock resistance |
500 m/s2, 3 times in each of the X, Y, and Z directions |
|||||
Case material |
Polycarbonate |
|||||
Weight |
Approx. 115 g (including 2-m cable) |
|||||
*1 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended |
Downloads
For Your Support