Digital Fibre Optic SensorsFS-V20 series

FU-96T

Transmissive Fibre Unit

SPECIFICATIONS

Select Language

Model

FU-96T*1

Type

Thrubeam

Fibre unit length

2 m free-cut

Fibre unit diameter

ø2.2

Minimum bend radius

R25 mm*2

Minimum detectable object

Opaque material with a diameter of 0.2 mm*3

Tightening torque

0.2 N m or less

Environmental resistance

Enclosure rating

IP67*4

Ambient temperature

0 to +60 °C (No condensation and no freezing)*5

Relative humidity

35 to 85 % RH (No condensation and No freezing)*6

Material

Main unit case : PFA, fibre sheath : PFA*4

Accessories

Fibre cutter

Weight

Approx. 35 g

*1 For details on the detecting distance, see the fibre amplifier catalogue.
*2 The section 25 mm in length from the screw cap tip of the main unit case cannot be bent.
*3 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.
*4 Using this product in high-temperature liquids or steam may lead to penetration of the fluorocarbon polymers, which may cause fluctuations in the received light intensity and damage to the internal components.
*5 Use this product under the condition that if the ambient temperature exceeds 60 °C, the absolute humidity is 60 °C 85%RH or less.
*6 Use this product under the condition that if the ambient temperature exceeds 60 °C, the absolute humidity is 60 °C 85 % RH or less.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors