High-precision Electrostatic SensorSK series

SK-200

Amplifier Unit

SPECIFICATIONS

Select Language

Model

SK-200

Type

Controller

Measurement method

V.S.S. method

Measurement mode

High-precision mode,Wide-range mode

Measurement range

High-precision mode

0 to ±5 kV

Wide-range mode

0 to ±30 kV

Measurement accuracy

High-precision mode

±10 V*1*2

Wide-range mode

±3% of F.S.*3*2

Analogue voltage output

Output voltage

High-precision mode

±5 V

Wide-range mode

±3 V

Output impedance

100 Ω

Sampling time

0.1 sec.

Control input

Type

Program (P1, P2, P3), Timing, Hold-reset

Signal

NPN or Non-voltage contact signal

Controloutput

Tolerance judgement

HI/GO/LO,
NPN : 100 mA max. (40 V max.) N.O.

Response time

0.2 sec. (at No. of averaging measurements : 1)

Major functions

Feedback input to the SJ-F020 static eliminator blower type, Measurement
No. of averaging measurements setting, Various hold,
Upper/lower limit setting, Panel-lock, Program selection

Control output

Alarm output

NPN : 100 mA max. (40 V max.) N.C.

Rating

Power voltage

24 VDC ±10%

Current consumption

600mA or less

Environmental resistance

Operating ambient temperature

0 to +50°C

Operating ambient humidity

35 to 85% RH (No condensation)

Material

Polycarbonate

Weight

Approx 900 g

*1 Obtained with a measurement distance of 8 to 12 mm and an electrostatic charge of ±100 V or less. When the charge is ±100 V to ±5 kV, the measurement accuracy is ±10% of the measured value.
*2 When ambient temperature is fixed at 25°C.
*3 Obtained with a measurement distance of 68 to 72 mm. When the charge is ±10 kV to ±30 kV, the measurement accuracy is ±5% of the F.S.

For visitors who viewed this page

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Static Eliminators / Ionizers