|
|
 |
|
| Specifications |
|
|
|
Digital Fiberoptic Sensor (FS-N) Specifications |
Best in Class Performance with the Specifications to Back it Up. |
| For Full Details Download the PRODUCT CATALOG Using the SERVICE PULLDOWN Above. |
|
| Digital Fiberoptic Sensor (FS-N) Specifications |
|
|
|
1. Use a cable length of 30m or less for M8 connector types.
2. FS-N11MN only
3. SUPER: 1.2 ms, ULTRA: 1.8 ms, MEGA: 4.2 ms
4. Increases 100 mW (4.0 mA) for High Speed mode
5. One or two more units connected: -20 to +55°C; 3 to 10 more units connected: -20 to +50°C; 11 to 16 more units connected: -20 to +45°C. When using 2-outputs,
one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting. |
|
| Water Resistant Digital Fibreoptic Sensor |
|
|
|
1. Use a cable of 30 m or less.
2. When the Power Mode is set to HIGH SPEED, 100 mW (4.0 mA) will be added.
3. About the enclosure rating when a small-diameter fibre unit (the diameter of the cable is ø1.3 or ø1.0) is used.
IP66/IP65 cannot be satisfied when the type whose diameter is ø1.3 and terminal can be separated (FU-4F/ 66/91/93/43/63/63T etc.) is used.
When any small-diameter fibre units except for the above are used, IP65 is applied.
4. In any of the following cases, the enclosure rating IP66/IP65 cannot be satisfied.
• When the Fibre Unit and KEYENCE’s M8 connector cable are not connected (Recommended conditions to tighten up the M8 connector: Tighten it by hand first.
Then retighten it as much as 1/16-1/8 of a rotation with pliers.)
• When the Fibre Unit and KEYENCE’s M8 connector cable are not connected
• When the dust cover of the Sensor Amplifier is open
• When there is debris in the dust cover
• When the waterproof adapter A/B are not used at the time of installation of a small-diameter fibre unit. |
|
Input and Output Circuit Diagrams |
|
|
|
|
|
| |
|
|
|
| FS-N11N / N12N / N11MN / N13N / N14N |
|
|
|
|
| Output Circuit Diagram |
Input Circuit Diagram (FS-N13N/N14N only) |
|
|
|
|
|
|
|
|
*1 FS-N11N/N11MN/N13N only
*2 FS-N11MN only
*3 The FS-N13N/N14N has a white cable as separate output 2. |
|
| FS-N11P / N12P / N13P / N14P / N13CP / N14CP |
|
|
|
|
| Output Circuit Diagram |
Input Circuit Diagram (FS-N13P/N14P only) |
|
|
|
|
|
|
|
|
| |
|
|
|
| M8 connector pin layout |
|
|
|
|
|
|
|
|
|
*1 FS-N11P/N13P/N13CP only
*2 The FS-N13P/N14P has a white cable as separate output
The FS-N13CP/N14CP has pin (2) as separate output 2. |
|
| FS-N11CN / N12CN |
|
|
|
|
| Output Circuit Diagram |
Input Circuit Diagram |
|
|
|
|
|
|
|
|
| |
|
|
|
| M8 connector pin layout |
|
|
|
|
|
|
|
|
|
| * FS-N11CN only |
|
| FS-N11CP / N12CP |
|
|
|
|
| Output Circuit Diagram |
Input Circuit Diagram |
|
|
|
|
|
|
|
|
| |
|
|
|
| M8 connector pin layout |
|
|
|
|
|
|
|
|
|
| * FS-N11CP only |
|
|
|
M8 Connector Cable (sold separately)
OP-73864 (Cable length: 2 m)
OP-73865 (Cable length: 10 m) |
M8 Connector junction cable (OP-85498 sold separately) |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Related Information Topics |
|
|
|
|
| Related Product Downloads |
|
 |
Fiber Optic Sensor
|
|
| Digital Fiberoptic Sensor |
FS-N Series
NEW
|
|
 |
 |
|
 |
 |
| DeviceNet Compatible Network Unit |
NU-DN1
NEW
|
|
|
|
|
|
|
| CC-Link Compatible Network Unit |
NU-CL1
NEW
|
|
|
|
|
|
|
| EtherNet/IP Compatible Network Unit |
NU-EP1
NEW
|
|
|
|
|
|
|
| MEGA POWER Fiber Optic Sensor |
FS-V30 Series
|
|
|
|
 |
|
|
| Dual Digital Display type |
FS-V20 Series
|
|
|
|
|
|
|
| Hybrid Calibration type |
FS-V10 Series
|
|
|
|
|
|
|
| High Accuracy type |
FS01/V1 Series
|
|
|
|
|
|
|
| Fiber Unit Models |
FU Series
|
|
|
|
|
|
|
| RGB Digital Fiberoptic type |
CZ Series
|
|
|
|
|
|
|
| RGB Digital Fiberoptic Sensors |
CZ-V20 Series
|
|
|
|
|
|
|
|
|
| Product catalogs and manuals include both sensor head and amplifier information. |
|
|
|
 |
 Price Info |
| Request FS-N Series (FS-neo) price information. |
|
|
|
|
|
|
|
