|
|
 |
|
|
|
|
GT2: High-precision Contact Digital Sensor |
|
| For Full Details Download the PRODUCT CATALOG Using the SERVICE PULLDOWN in the HEADER Above. |
|
Highest precision in its class |
|
| Absolute system |
|
|
|
|
|
|
Tough and rugged [maintenance cost reduction] |
|
| Detecting durability: 20 million times [long life] |
Linear ball bearings are used for the spindle to ensure long service life.
* GT2-H12 (L/K/KL) |
|
|
|
![Detecting durability: 20 million times [long life]](long_life.gif)
|
|
IP67 enclosure rating [water resistant cable] |
|
| Even the connector clears the IP67 enclosure rating based on the IEC/JIS standards |
|
|
|
| * Except for low stress type |
|
Easy sensor head installation and setup [reduction in the number of installation/setup steps] |
Easy installation with a special bracket
|
| Conventional method |
|
|
| A slotted jig must be prepared by the user. |
|
|
|
|
| GT2 |
|
|
| Mounting made easy simply by drilling a 10 mm hole. |
|
|
|
|
Simple tolerance setting |
Reduction in number of setting steps
|
| First, set a reference based on the actual target. |
|
|
|
|
|
|
|
| Enter the tolerance value based on the master target to complete setup. |
|
|
|
|
|
|
|
Easy amplifier installation and setup [reduction in the number of installation/setup steps] |
Select the best display unit according to your needs.
|
| DIN-rail mount |
|
|
| GT2-71N/71P |
|
|
| Compact, panel mount |
|
|
| GT2-75N/75P |
|
|
| Large display panel mount |
|
|
GT2-100N/100P
Easy-to-see large display |
|
|
| Pulse output |
|
|
GT2-71D
For outputting position data as pulses |
|
|
|
|
|
| Note: For the DIN-rail mount type, a connector type and an analog output type are also available. |
|
Total cost reduction |
|
| Simplified setup eliminates need for analog I/O cards and tedious PLC programming |
|
|
|
|
| No additional equipment required [Analog I/O card not necessary] |
Forget about the tedious PLC programming that you're used to with your existing LVDT's. The GT2 Series does the work for you.
In addition, you can save money by eliminating the analog I/O card from your budget. |
|
Versatile detection modes support all applications |
|
|
|
|
| Warp measurement of a mechanical chassis |
|
|
|
|
|
| Flatness measurement of an engine block |
|
|
|
|
|
Shaft diameter measurement
|
|
|
|
|
|
|
|
|
|
| Thickness measurement of a steel plate |
|
|
|
|
|
Board warpage detection
|
|
|
|
|
|
| Thickness measurement of a liquid crystal substrate |
|
|
|
|
|
|
|
|
|
| Sensor head for 12 mm (Standard/Low stress (L) type) |
|
|
|
*1 Value at center of measuring range.
*2 A dust boot is not provided with the GT2-H12KL or the GT2-H12L. |
|
| Sensor head for 32 mm /50 mm range (Standard/Low stress (L) type) |
|
|
|
*1 Value at center of measuring range.
*2 A dust boot is not provided with the GT2-H32L. |
|
| DIN-rail mount type amplifier unit |
|
|
|
|
|
| Panel mount type amplifier unit |
|
|
|
*1 Precautions when the GT2-70 Series is used with an expansion unit (excluding GT2-71D)
Up to 15 amplifi er units can be connected; main unit: 1 unit, expansion unit: 14 units. To use the DIN-rail mount type and additional units, be sure to use the end units (OP-26751). When mounting additional units, depending on the number of units to be added, confi rm the following specifi cation limitations.
[Up to 8 units (including main unit)]
• The power supply voltage is 20 to 30 VDC.
• The maximum applicable current for each output is 20 mA.
[Up to 9 to 15 units (including main unit)]
• The power supply voltage is 20 to 30 VDC.
• The maximum applicable current for each output is 10 mA (including DL-RB1A output current).
*2 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode |
|
| DIN-rail mount type pulse output amplifier unit |
|
|
|
|
|
| Communication unit (common specifications) |
|
|
|
|
|
| Communication unit (DL-RS1A communication specifications) |
|
|
|
|
|
|
|
|
| Related Information Topics |
|
| Related Product Downloads |
|
 |
Contact Sensor
|
|
| High-precision Contact Digital Sensor |
GT2 Series
NEW
|
|
 |
 |
|
 |
 |
| General Purpose Digital Contact Sensor |
GT Series
|
|
|
|
|
|
|
|
|
| Product catalogs and manuals include both sensor head and amplifier information. |
|
|
|
|
|
