Digital Display Compact Laser Thrubeam SensorLX2 series


Amplifier Unit

[Discontinued model]

This model has been discontinued.

Recommended Replaceable Products
To contact us:


Select Language



Display range

-19999 to +19999

Sampling rate

12,500 times/sec.

Control input

Laser remote

NPN open-collector or non-voltage contact signal



NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)

Response time


Analogue output

Output voltage

0 to 5V*2


100 Ω

Temperature characteristics

0.1 % of F.S./ °C*3

Major functions

Reference light intensity registration, light intensity correction, auto scaling, manual scaling, auto zero, offset, measurement mode (9 types), etc.


Power voltage

24 VDC ± 10%

Current consumption

190mA or less

Environmental resistance

Operating ambient temperature

0 to +50°C (32 to 122°F)

Operating ambient humidity

35 to 85 % RH , No condensation


Approx 220 g

*1 The response time when averaging is 1x and output is ON. When output is OFF, this is 0.2 ms.
*2 The output range for output voltage is ±5 V. When the display value is 0 to 100%, 0 to 5 V are output and when the display value is 0 to -100%, 0 to -5 V are output.
*3 Typical data obtained when the sensor head is connected. The temperature characteristic obtained when connecting the LX2-
110 (W) is 0.2% of F.S./°C.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe