Built-in amplifier photoelectric sensorsPZ2 series

PZ2-42

Square Reflective Cable Type, NPN

SPECIFICATIONS

Select Language

Model

PZ2-42

Type

Diffuse-reflective Short-range

Detection distance

100 mm (100 x 100 mm white mat paper)

Light source

Red LED

Detectable object

Transparent and opaque

Hysteresis(of detecting distance)

20% max.

Sensitivity adjustment

1-turn trimmer (240°)

Response time

1 ms max.

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output and power*1 : Red LED, Stable operation : Green LED

Controloutput

NPN or PNP : 100 mA (40 V) max., Residual voltage : 1 V max.

Protection circuit

Reversed polarity, overcurrent protection, surge absorber

Rating

Power voltage

12 to 24 VDC ±10%, ripple : 10% max., Class 2

Current consumption

35 mA max.

Environmental resistance

Enclosure rating

IP67

Operating ambientluminance

Incandescent lamp : 5,000 lux max., Sunlight : 20,000 lux max.

Operating ambient temperature

-20 to +55°C (no freezing)

Operating ambient humidity

35 to 85%RH (no condensation)

Vibration

10 to 55 Hz, double amplitude : 1.5 mm , 2 hours each in the X, Y and Z axis

Shock resistance

1000 m/s2 in X, Y, and Z directions, 6 times respectively

Case material

Glass-fibre reinforced plastic

Accessories

Mounting bracket×1 Mounting screws×2 Plate nut×1

Weight

Approx 50 g (including 2-m connector cable)

*1 The power indicator is equipped with the PZ2-51 only.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors