Built-in amplifier photoelectric sensorsPZ-V/M series

PZ-M53P

Square Transmissive M12 Connector Type, PNP

SPECIFICATIONS

Select Language

Model

PZ-M53P

Type

Thrubeam model (M12 connector cable type)

Output

PNP

Detecting distance

10m*1

Setting distance

Light source

Red LED

Sensitivity adjustment

1-turn trimmer (230°)

Response time

1.5 ms max.

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output and power: Orange LED, Stable operation: Green LED

Control output

Maximum PNP open-collector output: 100 mA (26.4 V or less), residual voltage: 1 V or less

Digital monitor

Protection circuit

Reversed polarity, overcurrent protection, surge absorber

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

T: 24 mA max. , R: 27 mA max.

Environmental resistance

Enclosure rating

IP67

Ambient light

Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-20 to +55 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s2, 6 times in each of the X, Y, and Z directions

Case material

Glass-fibre reinforced plastic

Weight

T: Approx. 50 g, R: Approx. 50 g

*1 The detecting distance is obtained with the maximum sensitivity.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Sensors