Multi-voltage power supply,built-in amp.photoelectric sensorsPW series


Transmissive Main Unit


Select Language




Thrubeam:with timer

Detecting distance

10 m *1

Light source

Infrared LED

Detectable object

Opaque materials
(15 x 15 mm min.)*1


Sensitivity adjustment

Response time

20 ms max.

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: Red LED, Power: Red LED (thrubeam type only)

Timer function

0.1 to 5 s *2

Control output

SPST-NO relay contact, 250 VAC 3 A max., 30 VDC 3 A max. (resistive load)

Noise resistance

Square-wave noise by noise simulator: 1 kV p-p, 1 μs (across power terminals)


Power voltage

24 to 240 VAC ±10%, 50/60 Hz, 12 to 240 VDC ±10%

Power consumption

3 VA max. (both transmitter and receiver)

Environmental resistance

Insulation resistance

20 MΩ min. (between each terminal and case, using insulation resistance metre of 500 VDC)

Enclosure rating


Operating ambientluminance

Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

Operating ambient temperature

-10 to +60°C (no freezing)

Operating ambient humidity

35 to 85% RH (No condensation)


10 to 55 Hz, double amplitude: 1.5 mm , 2 hours each in the X, Y and Z axis

Shock resistance

100 m/s2 in X, Y, and Z directions, 3 times respectively


Housing: PBT, Lens: acrylic, Terminal cover: Polysulfone


Transmitter: Approx. 70 g
Receiver: Approx. 95 g

*1 Opaque materials of 3 x 6 mm with slit plate attached (at detecting distance of 1.5 m )
*2 ON-delay, OFF-delay, and One-shot modes are selectable.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe