Self-contained CMOS Laser SensorLR-Z series


Square Reflective Type, M8 Connector Type, 100 mm


Select Language




Distance setting





Cable connection

M8 connector 3-pin

Detectable distance

35 to 100 mm (650 to 0)*1

Standard detectable deviation

35 to 50 mm : 1.5 mm, 50 to 100 mm : 3 mm

Display resolution

2 (0.2 mm)

Spot diameter

2 X 1 mm at 100 mm

Response time

1.5 ms / 10 ms / 50 ms selectable

Light source


Red laser (660 nm)

Laser class

Class 1 laser product
(IEC60825-1, FDA (CDRH) Part1040.10*2)



3-digit 7-segment display (red),
output indicator (yellow),
DATUM indicator (orange), 1 spot indicator (green)


OFF/ON delay/OFF delay/One-shot


Power voltage

10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS

Power consumption

450 mW or less (18 mA or less at 24 V, 34 mA or less at 12V)


Control output

PNP Open collector
Applied voltage 30 VDC or less,
Control current 100 mA or less,
Residual voltage 1.2 V or less at 10 mA or less,
2 V or less at 10 to 100 mA

Protection circuit

Protection against reverse power connection, output overcurrent,
output surge, reverse output connection

Output operation

Light-ON / Dark-ON selectable

External input

Input time calibration: 35 ms or more ON, 35 ms or more OFF
Laser emission stop: 2 ms or more ON, 20 ms or more OFF
Short-circuit current: 2 mA or less*3

Environmental resistance

Enclosure rating

IP68 (IEC60529)/IP69K (DIN40050-9)/
4X, 6P, 13 (NEMA250)

Operating ambientluminance

Incandescent lamp:
4000 lx or less
Sunlight: 8000 lx or less*4

Operating ambient temperature

-10 to +50°C

Ambient temperature for storage

-25 to +75°C

Operating ambient humidity

35 to 85%RH

Shock resistance

1000 m/s2 in X, Y, Z axis directions respectively 6 times


10 to 55 Hz Double amplitude 1.5 mm in the X, Y, Z
axis directions respectively, 2 hours

Insulation resistance

20 MΩ or more (500 VDC)

Withstand voltage

1000 VAC 50/60 Hz 1 min


Case: SUS316L, Display: PES,
Lens cover: PMMA with scratch-resistant coating,
Packing/Connector ring: FKM


Instruction Manual, Certification/Identification label (FDA)


Approx 55 g

*1 Display reading used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds “-99”, “-FF” is displayed.
*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*3 M8 connector (3-pin) type does not include the external input function.
*4 When the response time is 10 ms

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe