Manual-Calibration Fibreoptic SensorFS-V/T/M series (FS01)


Wiring-saving Connector Unit

[Discontinued model]

This model has been discontinued.

To contact us:


Select Language



Response time

410 µs to 1.2 ms 2*1

Expandable inputs

16 (15 when using stability output)

Number of outputs


Control output

NPN open-collector 50 mA max. (40 V max.) Residual voltage: 1 V max.

Protection circuit

Reversed polarity protection, Overcurrent protection, Surge absorber


Power voltage

12 to 24 VDC ±5%, ripple (P-P): 5% max. 1*2

Current consumption

20 mA or less, plus current consumed by
expansion units connected

Environmental resistance

Operating ambient temperature

-10 to +50°C, No freezing *3

Operating ambient humidity

35 to 85% RH (No condensation)


10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours

Shock resistance

500 m/s2 in X, Y and Z directions, 3 times respectively

Case material



Approx. 150 g

*1 The response speed varies depending on the number of expansion units connected.
*2 Change the supply voltage to meet the requirement of the input device (PLC, etc.).
*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 10 Units: -10 to +50°C, 11 to 16 Units: -10 to +45°C.

For visitors who viewed this page

    • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors

    Fibre Unit Finder

    • Fibre Unit Finder

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe