Two-colour Digital Display Pressure SensorAP-30 series

AP-33Z

Main Unit, Positive-pressure Type, 1 Mpa, NPN

SPECIFICATIONS

Select Language

Model

AP-33Z

Type

Positive pressure , Zero shift [cannot be used within Japan according to the Measurement Act]

Output

NPN output

Rated pressure

0 to 1.000 MPa

Type of pressure

Gauge pressure

Fluid type

Air or non-corrosive gases

Display resolution

0.01 bar, 0.2 Psi,
0.001 MPa, 0.01 kgf / cm2

Display range

-15% to +110% of F.S.

Response time (chatterprevention function)

2.5/5/100/500 ms (selectable)

Display power

3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm )

I/O

Analogue output

Zero-shift input

No-voltage input (with contacts, without contacts), input time: 20 ms or more

Control output hysteresis

Variable (when hysteresis mode is selected), 0.5% of F.S. in standard mode

Rating

Power voltage

12 to 24 VDC ±10%, Ripple (P-P): 10% max.

Current consumption

50 mA (at 24 V), 90 mA (at 12 V)

Environmental resistance

Operating ambient temperature

0 to +50°C (no freezing)

Operating ambient humidity

35 to 85% RH (No condensation)

Vibration

10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively

Pressure resistance

14.7 bar (1.47 MPa)

Material

Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,
Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable

Weight

Approx.120 g

For visitors who viewed this page

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Process Controls / Process Sensors