|
|
 |
|
| Specifications |
|
|
|
IL Series CMOS Multi-Function Analogue Laser Sensor |
Best in Class Performance with the Specifications to Back it Up. |
| For Full Details Download the PRODUCT CATALOG Using the SERVICE PULLDOWN Above. |
|
| Sensor heads |
|
|
|
1. The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice No.50.
2. Value when measuring the KEYENCE standard target (white diffuse object).
3. F.S. of each model is as follows. IL-S025: ±5 mm IL-S065: ±10 mm
4. Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128.
5. Value when the sampling rate is set to 2 ms or 5 ms. |
|
|
|
|
|
1. The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice No.50.
2. Value when measuring the KEYENCE standard target (white diffuse object).
3. F.S. of each model is as follows. IL-S025: ±5 mm IL-S065: ±10 mm
4. Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 128.
5. Value when the sampling rate is set to 2 ms or 5 ms. |
|
| Sensor head cables (sold separately) |
|
|
|
|
|
| Amplifier unit |
|
|
|
1. Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA.
2. Assign an input of your choice to the 4 external input lines before using.
3. – The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit)
– The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit)
4. If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. |
|
| WIRING DIAGRAM |
|
|
|
1. The brown, blue, and light blue cables are not provided in a IL-1050/ IL-1550 unit (expansion unit). The power is supplied to the expansion unit from the IL-1000/IL-1500
unit (main unit).
2. For an analogue output, OFF (not used), 0 to 5 V, ±5 V, 1 to 5 V, or 4 to 20 mA can be selected.
3. For an external input, bank A input, bank B input, laser emission stop input, or OFF (not used) can also be selected. For details, refer to the User's Manual.
4. If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. |
|
| EtherNet/IP Communication unit DL-EP1 |
|
|
|
|
|
| DeviceNet Communication unit DL-DN1 |
|
|
|
|
|
| RS-232C Communication unit DL-RS1A |
|
|
|
|
|
| BCD output unit DL-RB1A |
|
|
|
|
|
| Optional |
|
|
|
|
|
|
|
|
|
|
| Related Information Topics |
|
|
|
|
| Related Product Downloads |
|
 |
Application Sensor
|
|
| CMOS Analogue Laser Sensor |
IA Series
NEW
|
|
 |
 |
|
 |
 |
| Thrubeam Type Laser Detection Sensor |
IB Series
NEW
|
|
|
|
|
|
|
| Multi-Purpose CCD Laser Micrometer |
IG Series
NEW
|
|
|
|
|
|
|
| CMOS Multi-Function Analogue Laser Sensor |
IL Series
NEW
|
|
|
|
|
|
|
| High-precision Contact Digital Sensor |
GT2 Series
NEW
|
|
|
|
|
|
|
| General Purpose Digital Contact Sensor |
GT Series
|
|
|
|
|
|
|
| Digital, High Speed/Accuracy type |
EX-V Series
|
|
|
|
 |
|
|
| High Accuracy type |
EX-500 Series
|
|
|
|
|
|
|
| High-speed Response type |
EX-200 Series
|
|
|
|
|
|
|
| Analog Sensor Controllers |
RD Series
|
|
|
|
|
|
|
| Communication unit |
DL Series
|
|
|
|
|
|
|
|
|
|
|
Recommended Products!
|
|
|
| IB Series NEW |
| Thrubeam Type Laser Detection Sensor |
|
|
|
|
| IG Series NEW |
| Multi-Purpose CCD Laser Micrometer |
|
|
|
|
|
