|
|
 |
|
| Features |
|
|
|
Lineup |
An abundance of head variations for all applications |
| For Full Details Download the PRODUCT CATALOG Using the SERVICE PULLDOWN Above. |
|
Communication unit |
|
| DL-EP1 EtherNet/IP Communication Unit |
| The DL-EP1 is an EtherNet/IP compatible adaptor which can read and write the data from the connected sensor amplifier from a PLC (programmable controller). It supports cyclic communication as well as UCMM and Class 3 (explicit message communication). Data can be exchanged without a ladder program. The sensor amplifier settings and status can be read and written at random timing, and commands can be issued to the sensor amplifier. |
|
|
|
 |
|
|
|
| DL-DN1 DeviceNet supported Communication Unit |
The DL-DN1 operates as a slave unit of DeviceNet communication. Using DeviceNet communications, the sensor amplifiers and other units connected to the DL-DN1 can transmit their ON/ OFF control signals and measured values as communication data to PLC or other equipment.
The DL-DN1 supports I/O communication (polling) and explicit messaging. I/O polling enables data communication without the need of a ladder program. Explicit messaging allows for reading/writing sensor amplifier parameters and issuing commands to the sensor amplifiers. |
|
|
|
 |
|
|
|
| RS-232C Communication unit DL-RS1A |
Use this unit when outputting digital data to an external device with RS-232C signals. In addition the unit can be used to externally program the amplifiers.
*1. D-sub 9 pin connector cable (OP-81283) can be used for connection. |
|
|
|
 |
|
|
|
| BCD output unit DL-RB1A |
| Use this unit when retrieving numerical data from the IL Series to an external device as digital data. A single communication unit can retrieve data from up to 8 IL Series display units via BCD. |
|
|
|
 |
|
|
|
| Communication unit: Lineup |
|
|
|
 |
|
| The ◎ mark indicates that wire reduction and the creation of a Communication Program is not necessary. |
|
| Communication unit: Supported Sensor Amplifiers (as of March 1st, 2011) |
GT2 Series / GT-70A Series / IG Series*1 / IB Series*2 / IL Series*3
*1 DL-RS1A units purchased on or before July 14th, 2009 cannot be used.
*2 DL-DN1 units purchased on or before July 14th, 2010 cannot be used.
*3 DL-EP1/DL-DN1 is not supported.
Inquire separately concerning compatibility conditions |
|
|
|
|
|
|
| Related Information Topics |
|
|
|
|
| Related Product Downloads |
|
 |
Application Sensor
|
|
| CMOS Analogue Laser Sensor |
IA Series
NEW
|
|
 |
 |
|
 |
 |
| Thrubeam Type Laser Detection Sensor |
IB Series
NEW
|
|
|
|
|
|
|
| Multi-Purpose CCD Laser Micrometer |
IG Series
NEW
|
|
|
|
|
|
|
| CMOS Multi-Function Analogue Laser Sensor |
IL Series
NEW
|
|
|
|
|
|
|
| High-precision Contact Digital Sensor |
GT2 Series
NEW
|
|
|
|
|
|
|
| General Purpose Digital Contact Sensor |
GT Series
|
|
|
|
|
|
|
| Digital, High Speed/Accuracy type |
EX-V Series
|
|
|
|
 |
|
|
| High Accuracy type |
EX-500 Series
|
|
|
|
|
|
|
| High-speed Response type |
EX-200 Series
|
|
|
|
|
|
|
| Analog Sensor Controllers |
RD Series
|
|
|
|
|
|
|
| Communication unit |
DL Series
|
|
|
|
|
|
|
|
|
|
|
Recommended Products!
|
|
|
| IB Series NEW |
| Thrubeam Type Laser Detection Sensor |
|
|
|
|
| IG Series NEW |
| Multi-Purpose CCD Laser Micrometer |
|
|
|
|
|
