CCD Laser Displacement Sensor

LK series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Confocal Displacement Sensor - CL-3000 series

Sensor Head, Small Spot LK-010

LK-010 - Sensor Head, Small Spot

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		LK-010
Type		Sensor head Compact high-accuracy Sensor head
Measurement mode		Normal,mirror surface
Reference distance		10 mm (Normal),7.0 mm (mirror surface)
Measuring range		±1 mm (Normal),±0.9 mm (mirror surface)
Light source	Type	Red semiconductor laser
	Wavelength	670nm (Visible light), Class 2 laser product (JIS C6802)
	Output	0.95 mW maximum
Spot diameter (at standard distance)		Approx. 20 µm
Linearity		±0.25% of F.S.
Repeatability		0.1 µm^*1
Analogue output	Output voltage	±10 V (±9 V) (0.1 µm/mV)^*2
	Impedance	100 Ω
	Output current	4 to 20 mA (350 Ω maximum)^3^4
Alarm output		NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.
Sampling cycle		128, 256, 512, 2,048 µs (selectable)
Other functions		Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle
Temperature characteristics		0.04% of F.S./°C
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Maximum current consumption	400 mA max.
Environmental resistance	Enclosure rating	IP64
	Ambient light	Incandescent or fl uorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C (No condensation)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Aluminium die-cast
Weight		Approx. 85 g (including cable)
^1 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. ^2 When measurement is impossible, 12 V (31.2 mA) is output. ^3 LK-010: When measurements cannot be performed, this is 12 V (21 mA). LK-035/030, LK-085/080, and LK-500: When measurements cannot be performed, this is 12 V (31.2 mA). ^4 The ±5 V analog voltage output range (the ±

Data Sheet (PDF) Other Models