High-Accuracy Digital Contact SensorGT2 series


Sensor Head, Air Cylinder Model


Select Language



Detection system

Scale Shot System, absolute (no tracking errors) type

Measuring range

50 mm


0.5 μm

Indicated accuracy

3.5 µm (p-p)*1

Measuring force

Downward mounting

3.2 N*2

Side mounting

2.8 N*2

Upward mounting

2.4 N*2

Applied pressure range

0.25 MPa to 0.50 MPa

Pressure resistance

1 MPa

Fluid used

Dry air

Operation indicator light

2-colour LED (red, green)


Enclosure rating

IP67 (IEC)*3

Ambient temperature

0 to +55°C (No freezing)

Relative humidity

35 to 85% RH (No condensation)


10 to 55 Hz Double amplitude 1.5 mm in the X, Y, Z axis directions respectively, 2 hours*4


Main body

Main body case: die-cast zinc, Cylinder section: aluminium alloy, Air joint resin: polyacetal, Air joint metal: nickel-plated brass, Indicator: polyarylate (PAR)

Dust boot



SUS304, SUS440C*5

Sensor head cable

Optional (connect to the M8 connector)


Approx. 405 g (not including cable)

*1 Value when the ambient temperature is 20°C.
*2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot.
*3 Connect an exhaust joint to the air tube and ensure that foreign matter does not enter the tube from joint.
*4 When using mounting bracket D (OP-84327), the double amplitude is 0.75 mm.
*5 Contacts are available as options sold separately.

For visitors who viewed this page

    Contact Sensor Tips

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Measurement Sensors