High-Accuracy Digital Contact SensorGT2 series


Sensor Head, Air Cylinder Model


Select Language



Detection system

Scale Shot System, absolute (no tracking errors) type

Measuring range

32 mm


0.5 μm

Indicated accuracy

3 µm (p-p)*1

Measuring force

Downward mounting

2.1 N*2

Side mounting

1.8 N*2

Upward mounting

1.5 N*2

Applied pressure range

0.25 MPa to 0.50 MPa

Pressure resistance

1 MPa

Fluid used

Dry air

Operation indicator light

2-colour LED (red, green)


Enclosure rating

IP67 (IEC)*3

Ambient temperature

0 to +55°C (No freezing)

Relative humidity

35 to 85% RH (No condensation)


10 to 55 Hz Double amplitude 1.5 mm in the X, Y, Z axis directions respectively, 2 hours*4


Main body

Main body case: die-cast zinc, Cylinder section: aluminium alloy, Air joint resin: polyacetal, Air joint metal: nickel-plated brass, Indicator: polyarylate (PAR)

Dust boot



SUS304, SUS440C*5

Sensor head cable

Optional (connect to the M8 connector)


Approx. 340 g (not including cable)

*1 Value when the ambient temperature is 20°C.
*2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot.
*3 Connect an exhaust joint to the air tube and ensure that foreign matter does not enter the tube from joint.
*4 When using mounting bracket D (OP-84327), the double amplitude is 0.75 mm.
*5 Contacts are available as options sold separately.

For visitors who viewed this page

    Contact Sensor Tips

    Latest / Most Downloaded

      • General Catalogue Request
      • Trade Shows and Exhibitions
      • eNews Subscribe

      Measurement Sensors